Section 7D.7C - 2021 (May & June)
MW2047 Restoration Progress (May)
LH Steps given a second coat of
black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
Rear Inside RH frame given a second
coat of black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
Rear Inside LH frame given a second
coat of black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
RH Steps given a second coat of
black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
RH rear outside frame after a second
coat of black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
LH rear outside frame after a second
coat of black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
Brake gear shaft after a second coat
of black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
Rear LH outside frame and steps after
a second coat of black gloss paint @ SVR
Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
Brake gear shaft after a second coat
of black gloss paint @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
Rear LH Inside frame after a second
coat of black & red gloss paint @ SVR
Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
Rear RH Inside frame sfter a second
coat of black & red gloss paint @ SVR
Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
Rear RH Inside frame and trailing axlebox
after red gloss paint had been applied @
SVR Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
Rear LH Inside frame and trailing axlebox
after red gloss paint had been applied @
SVR Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
View of inside frames looking
forward from rear @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
New front buffer beam (under cover)
moved adjacent to locomotive @ SVR
Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
New front buffer beam moved
adjacent to loco @ SVR Bewdley
on Sunday 2nd May 2021.2.5.21.
(photo: David Cooke)
New rear buffer beam (under cover)
moved adjacent to locomotive @ SVR
Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
New rear buffer beam moved
adjacent to loco @ SVR Bewdley
on Sunday 2nd May 2021.
(photo: David Cooke)
Rear view of locomotive with new
buffer beam moved adjacent @ SVR
Bewdley on Sunday 2nd May 2021.
(photo: David Cooke)
'A' Frame following assembly but
prior to being elevated @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
New rear bufferbeam after being
painted with red oxide primer (on the
previous weekend) @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
Saddletank, Smokebox, old boiler
& chassis @ SVR Bewdley on
Sunday 16th May 2021.
(photo: David Cooke)
New 'A' frame in position over
rear end of chassis @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
New rear bufferbeam after being
turned over but prior to being
cleaned & painted @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
New front bufferbeam after being
turned over but prior to receiving
a second coat of red oxide @ SVR
Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
WILT working area (formerly occupied
by 4150 Trust) @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
New front bufferbeam after a second
coat of red oxide primer @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
New rear bufferbeam being cleaned
prior to painting with red oxide primer @
SVR Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
New rear bufferbeam after being cleaned
prior to painting with red oxide primer @
SVR Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
New rear bufferbeam after receiving
a coat of red oxide primer paint @ SVR
Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
New 'A' frame now mounted on channel
sections to allow for easy movement @ SVR
Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
New front bufferbeam under cover
after being painted with red oxide
@ SVR Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
Rear Buffers following removal
from old Bufferbeam @ SVR
Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
Cabsides & Firebox cladding support hoops
during painting with red oxide primer @
SVR Bewdley on Sunday 16th May 2021.
(photo: David Cooke)
LH driving wheels in the process
of being cleaned @ SVR Bewdley
on Sunday 16th May 2021.
(photo: David Cooke)
Saddletank, Boiler & Frames basking
in the sunshine @ SVR Bewdley
on Sunday 30th May 2021.
(photo: David Cooke)
Rear buffer monting faves given a
coat of red oxide after cleaning @ SVR
Bewdley on Sunday 30th May 2021
(photo: David Cooke)
Old & new rear bufferbeams following
removal of former @ SVR Bewdley
on Sunday 30th May 2021.
(photo: David Cooke)
RH rear cab window frame
following removal @ SVR Bewdley
on Sunday 30th May 2021.
(photo: David Cooke)
Robin Jones cleaning the mounting
brackets following removal of
rear bufferbeam @ SVR Bewdley
On Sunday 30th May 2021.
(photo: David Cooke)
Rear Bufferbeam Mounting Brackets
after being cleaned and painted with
red oxide primer @ SVR Bewdley
on Sunday 30th May 2021.
(photo: David Cooke)
Firebox cladding support hoops
after being given another coat of
red oxide primer @ SVR Bewdley
on Sunday 30th May 2021.
(photo: David Cooke)
LH cabside after being
given another coat
of red oxide @ SVR
Bewdley on Sunday
30th May 2021.
(photo: David Cooke)
Rear Bufferbeam mounting brackets
after being prepared for trial fitting
of new bufferbeam @ SVR Bewdley
on Sunday 30th May 2021.
(photo: David Cooke)
LH & RH rear cab window frames
following removal @ SVR Bewdley
on Sunday 30th 2021.
(photo: David Cooke)
Inside view of cab following
removable of rear window
frames @ SVR Bewdley on
Sunday 30th May 2021.
(photo: David Cooke)
MW2047 Restoration Progress (June)
New rear bufferbeam trial fitted
in position @ SVR Bewdley on
Sunday 13th June 2021.
(photo: David Cooke)
New rear bufferbeam trial fitted
in position @ SVR Bewdley on
Sunday 13th June 2021.
(photo: David Cooke)
View of cab taken from inside of frames @
SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
View of cranks & eccentrics after cleaning
@ SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
View of LH driving wheel spring after cleaning
@ SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
Andy Poole & Brian Hill drilling pilot
mounting holes in new rear bufferbeam @
SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
Andy poole & Brian Hill drilling pilot
mounting holes in new rear bufferbeam @
SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
View of RH inside frames after cleaning @
SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
View of rear end with new bufferbeam
being prepared for drilling of mounting
holes after trial fitting @ SVR Bewdley
on Sunday 13th June 2021.
(photo: David Cooke)
Second trial fitting of new rear
bufferbeam @ SVR Bewdley
on Sunday 13th June 2021.
(photo: David Cooke)
Second trial fitting of new rear
bufferbeam @ SVR Bewdley
on Sunday 13th June 2021.
(photo: David Cooke)
Rear buffer stock after being cleaned
and painted with red oxide primer @ SVR
Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
LH cabside after being painted
with black topcoat @ SVR Bewdley
on Sunday 13th June 2021.
(photo: David Cooke)
RH cabside after being painted
with black topcoat @ SVR Bewdley
on Sunday 13th June 2021.
(photo: David Cooke)
Mounting holes being drilled in new rear
bufferbeam by Andy Poole & Brian Hill @
SVR Bewdley on Sunday 13th June 2021.
(photo: David Cooke)
New rear bufferbeam with angles attached
ready to be lifted into position @ SVR
Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
New rear bufferbeam with angles
attached ready to be lifted into position
@ SVR Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
New rear bufferbeam being lifted
into position @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
New rear bufferbeam in position being
attached with temporary bolts @ SVR
Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
Inside RH Frame & leading axlebox
after cleaning @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
New rear bufferbeam fixed in place
with temporary bolts @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
Rear Buffer after being dismantled
but prior to being re-rusted @ SVR
Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
Rear buffer headstock after
being dismantled @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
front bufferbeam with buffers being
given a coat of red oxide primer @ SVR
Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
New rear bufferbeam after getting
another coat of red oxide primer @ SVR
Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
Old rear bufferbeam about to be
taken to the scrap bin @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
Front bufferbeam with buffers and
drawhook having had another coat
of red oxide primer @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
Robin Jones in appropriate PPE
cleaning rear buffers prior to painting
with red oxide primer @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)
Rear buffer after cleaning but prior to
painting with red oxide primer @ SVR
Bewdley on Sunday 27th June 2021.
(photo: David Cooke)
New rear bufferbeam given a coat
of red oxide primer @ SVR Bewdley
on Sunday 27th June 2021.
(photo: David Cooke)