0-6-0ST MW No.2047 of 1926 'Warwickshire'
At SVR Bridgnorth prior to start of
dismantling (apart from removal
of coupling rods) in April 2011.
(photo: Celestial Toymaker)
0-6-0ST MW No.2047 of 1926 'Warwickshire' Partially dismantled
inside Boiler Shop at SVR Bridgnorth on 16th September 2011.
The boiler has straps attached ready to be lifted from frames.
(photo: Duncan Ballard)
0-6-0ST MW No.2047 of 1926 'Warwickshire' Old boiler inside Boiler Shop at SVR Bridgnorth on 16th September 2011 following removal from frames.
A new boiler is to be designed and detailed to latest standards of boiler construction but retain visual features of old boiler.
(photo: Duncan Ballard)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Reduced to frames and cab following
the removal of the boiler at SVR
Bridgnorth on 16th September 2011.
(photo: Duncan Ballard)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Frames and cab sheeted over stored behind platform 2 at SVR Bridgnorth on 5th July 2012.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Old boiler and smokebox stored in loco
yard at SVR Bridgnorth on 5th July 2012.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Old boiler being inspected by Robin Jones
at SVR Bridgnorth on 5th July 2012.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Boiler mountings removed from old boiler
at SVR Bridgnorth on 5th July 2012 (including safety valves, regulator and firehole door)
which will be re-used on the new boiler.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Saddle tank stored on well wagon in
headshunt at SVR Bridgnorth
on 8th July 2012.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Now moved inside the Workshop at SVR Bridgnorth on 12th June 2013.
(photo: Carl Jones)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
With cylinder and Valve chest covers
removed at SVR Bridgnorth
on 12th June 2013.
(photo: Carl Jones)
0-6-0ST MW No.2047 of 1926 'Warwickshire' Being inspected by Robin Jones inside
Workshop at SVR Bridgnorth on
Sunday 14th July 2013.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
View of cylinder block and slide bars inside
frames at SVR Bridgnorth on Sunday
14th July 2013.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Both rear springs removed and placed on
running plate at SVR Bridgnorth on
Sunday 14th July 2013.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Valve chest cover removed and placed on
running plate at SVR Bridgnorth
on Sunday 14th July 2013.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire' Motion parts removed (including Eccentric sheaves and slide bars) and placed on the running plate at SVR Bridgnorth
Sunday 14th July 2013.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Dragged outside to enable cylinder
block to be removed for repair at SVR
Bridgnorth on 8th December 2013.
(photo: Carl Jones)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Showing corrosion damage to exhaust passage of
RH Cylinder casting prior to removal for repair
(by cast iron welding at SVR Bridgnorth
on 8th December 2013.
(photo: Carl Jones)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Driving wheel set on Wheel Lathe for tyre
turning at SVR Bridgnorth on
10th August 2014.
(photo: Carl Jones)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Cylinder blocks removed and split to allow
RH casting to be repaired at SVR
Bridgnorth on 10th August 2014.
(photo: Carl Jones)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Frames now lifted off driving wheelsets to
allow work to start on cleaning old paint
from outer frames at SVR Bridgnorth
on Sunday 23rd November 2014.
(photo: David Cooke)
0-6-0ST MW No.2047 of 1926 'Warwickshire'
Outer frames now given a first coat of red
oxide primer paint at SVR Bridgnorth
on Sunday 23rd November 2014.
(photo: David Cooke)